Praxis Works CR 104 BCD Wave 1x 30t
Pricing
£55.00
| Options | 30t Wave Black In Stock Despatch 3-5 Days |
|---|---|
| Description | • Will mount to most any 4-arm 104BCD MTB crank • 30T is a threaded ring and needs M8 male bolt with min 7.5mm length for interface. • RD- Must use with Mid or Long cage 'CLUTCH' type rear derailleur. Example Shimano Shadow or SRAM Type 2 • In very rough terrain, or just for pure security, we still recommend use of an upper guide "TW
With patent pending WaveTM retention technology. Licensed and developed in conjunction with MRP. The WaveTM pattern applies alternating lateral force to each chain link to actively retain links to ring - going beyond narrow/wide implementation that relies solely on friction. The WaveTM tooth pattern swings right to left, grasping the interior of the chain for retention, but allowing room for mud, debris, and grit to escape. The WaveTM design creates more open areas for mud and debris evacuation and preserves chain retention in adverse conditions - one of many " Achilles' Heels" of narrow/wide designs. Designed with mindful consideration of system friction, the WaveTM design actively engages the chain but yields much less concentrated wear than competing designs - spreading the load over large surface areas instead. Tough enough for Enduro, Downhill, and also weight conscious for XC riding. These MTB Wave Tech rings are machined from 7075-T6 aluminum and Hard Anodized to take a beating. • 104 BCD 30T, 32T, 34T, 36T and 38T• New Wave Technology tooth profile. Alternating teeth for better chain retention.• 30T NOTE : is a threaded and needs M8 bolt with min 7.5mm length threads.• 10/11sp Shimano/KMC/SRAM, 11sp SRAM XX1 chain• 4.5mm plate 7075-T6 Al for superior stiffness• Stamped and machined manufacturing with hard black anodizing for durability• REAR DER- Must use a 'CLUTCH' type rear derailleur. Example Shimano Shadow or SRAM Type 2• In very rough terrain, or just for pure security, we still recommend use of an upper guide• NOTE: Shimano SLX M675, XT M785 TECHNOLOGY Licensed and developed in conjunction with Mountain Racing Products. The WaveTM pattern tooth profile applies alternating lateral force to each chain link to actively retain links to ring - going beyond narrow/wide implementation that relies solely on friction. The WaveTM tooth pattern swings right to left, grasping the interior of the chain for retention, but allowing room for mud, debris, and grit to escape. The WaveTM design creates more open areas for mud and debris evacuation and preserves chain retention in adverse conditions - one of many drawbacks of narrow/wide designs. Designed with mindful consideration of system friction, the WaveTM design actively engages the chain but has much less wear than competing designs - spreading the load over large surface areas instead. Tough enough for Enduro, Downhill, and also weight conscious for XC riding. These MTB Wave Tech rings are machined from 7075-T6 aluminium and Hard Anodized to take a beating. |
As with any product, specification is subject to change without prior notification. You are advised to confirm current specification before buying.
